Stone coated roofing sheets Facts and Properties.
IT CONTAINS ANTI-CORROSIVE PROPERTIES:
The steel substrate is protected from corrosion by layers of metallic and polymer coatings. Stone coated utilizes an advanced metal composite
developed by BIEC International and introduced in 1973 as aluminum-Zinc coated steel.
The composite improved earlier metallic coatings by applying an aluminum-zinc alloy to the steel in a continuous hot-dip process.
The aluminum creates an inert barrier coat while enhancing the long-term performance of zinc and its ability to protect breaks in the coating.
Galvalume coated steel has repeatedly been shown in industry studies, conducted over the last 20 Years, to outperform the corrosion resistance
of other coated metals.
This is why stone coated roof system is referred to as “The final Roofing System”, and is backed up with a 50year limited warranty.
THE GRANULES IS SUPERBLY BONDED TO THE STEEL PANELS SO IT DOES NOT PEEL OFF.
Specially graded, non-oiled stone chips, produced by ISP Corporation, are used for all stone coated products.
The finely graded, non-oiled stone granules ensure long-term adhesion to the steel substrate and are embedded in a
UV (Ultra-Violet) resistant acrylic polymer for lasting bond to the steel substrate.
YOU CAN WALK ON STEEL ROOF.
Although, Some care must be exercised while walking on the roof, but note that roofers walk all over the shingles during the installation process.
THE COLOUR DO NOT FADE.
To be more precise, stone coated uses the same stone granules used by asphalt, shingle manufacturers for over 50 years so history
demonstrates that fading is not a problem. Over time, a slight change in color may occur due to settling of airborne contaminants;
however periodic rain or washing the roof with a garden hose will keep the roof looking new top.
BASIC SPECIFICATIONS OF STONE COATED STEP TILE.
Product weight per square meter: 1-Sq.ft, Steel Roofing 125lbs, Standard (3tab) Asphalt Shingles 190-215lbs.
Wood Shake/Shingle* 250-300lbs, Heavy Weight Laminated Asphalt Shingles 290-430lbs, Clay/Concrete tiles* 900-1200lbs
*Note that the weights for cedar, clay and concrete products are all dry weight increase when wet.
STEEL ROOF ARE THEY MORE SUSCEPTIBLE TO LIGHTNING STRIKE?
Steel roofing is no more susceptible to lighting than other roofing materials. It has been demonstrated that; lightning strikes most
frequently the highest points of terrain.
Where concerns exist, lightning rods can be installed on roofs that are the highest point of point of surrounding terrain.
IT DOES NOT CONDUCT HEAT THAN OTHER ROOFING SYSTEMS.
A properly vented steel roof system moves air both between the shingles and the underlying decks well as moving air from vents under the
decking. Heated air is allowed to dissipate through the ridge line as cooler air is drawn through eave vents.
Reduced energy bills can result from airflow both under and over the decking.
*All these facts / properties has attributed to the success of the Products over the years and we would not want you too to be left out of this quality service of ours because, we deal on quality & customer’s satisfaction is our priority.
Call Aminado Anita on 081-289-26-408 now for your most durable stone coated step tile roofing sheet at affordable prices in Nigeria.
Our Products is manufactured in New Zealand and Korea . The product is backed-up with 50 years of quality assurance;
1.) 0.55mm BOND/CLASSIC stone coated step tile roofing sheet is =N=2,400 per square meter
2.) 0.55mm ROMAN stone coated step tile roofing sheet is =N=2,600 per square meter
3.) 0.55mm SSHINGLE DESIGN =N=2,600 per square meter
4.) SHAKE 2,600
Ridge 1 meter @ =N= 1,300
Valley Gutter @ =N= 1,200
facial cover @ =N= 1,300
Bash board cover @ =N= 1,300
repair kit @ =N= 4,000
We deliver nationwide.
Quality is our Culture.